Replace your gas hot water system and cut your annual hot water bill from ~$1,200 to ~$200. Built-in Wi-Fi, Solar Soaker mode, R290 natural refrigerant — fully installed from $999 after all government rebates.
The Emerald Select 270L is an all-in-one heat pump that replaces your gas hot water system completely — same hot water, fraction of the cost. Compact footprint, simple installation, and a built-in Wi-Fi controller so you can manage it from your phone. Proudly Australian designed since 2006.
Gas hot water costs ~$1,200/year. This system runs for ~$180–$200/year. The saving starts from day one and grows every year as gas prices rise.
Control your system from anywhere. Set schedules, monitor usage, and run boost mode — all from your phone.
If you have solar, this system automatically uses your surplus export to heat water — near-free hot water on sunny days.
GWP of just 3 — the most environmentally responsible refrigerant available in a residential heat pump.
5-year tank warranty, 5-year parts, 2-year labour. Built to last.
Verified figures from the Emerald HPA1-S270E datasheet, tested per AS/NZS 4234 at 20°C/15°C ambient.
| Specification | HPA1-S270 | HPA1-S270E (with element) |
|---|---|---|
| Tank volume | 270L | 270L |
| COP (standard mode) | 4.41 | 4.41 |
| Heating capacity (standard) | 2.8 kW | 2.8 kW |
| Input power (standard) | 0.63 kW | 0.63 kW |
| Recharge rate (standard) | 58 L/h | 58 L/h |
| Heating capacity (boost) | 2.8 kW | 3.8 kW |
| Recharge rate (boost) | 58 L/h | 79 L/h |
| Electric element | N/A | 1 kW |
| Working range (with element) | — | -15°C to 43°C |
| Working range (without element) | -7°C to 43°C | -7°C to 43°C |
| Outlet water temperature | 60°C (max 70°C) | |
| Sound level at 1m | 50 dB(A) | |
| Refrigerant | R290 · 450g · GWP 3 | |
| Dimensions (unpacked) | 600 × 600 × 1970 mm | |
| IP rating | IPX4 | |
| Warranty | 5 yr tank · 5 yr parts · 2 yr labour | |
Emerald 270L · COP 4.41 · Real Victorian tariff rates
Current system cost
—
Heat pump running cost
—
Annual saving
—
Payback period
—
Have solar panels?
Schedule your heat pump to run during the day and your hot water running cost drops to near zero. Most Victorian retailers now pay as little as 2–3c/kWh feed-in — that solar is worth almost nothing exported. Far better to use it to heat your water for free.
After all rebates, no other heat pump installation in Melbourne comes close to $999. The gas-to-heat-pump VEU rebate makes this possible.
Gas hot water costs ~$1,200/year. This system costs ~$180–$200/year to run. The payback period on a $999 install is under 12 months.
Automatically runs on your surplus solar generation. If you have solar, your hot water running cost drops to near zero.
Every year you stay on gas, the gap between what you pay and what a heat pump costs widens. There's no better time to switch.
Tell us about your home and current gas system. We'll get back with a firm quote — usually same day.
We've received your enquiry. You should receive a confirmation email shortly.
Please open that email and confirm your email address so we can reach you. If you don't see it, check spam, junk, or promotions.
During business hours, we'll aim to follow up within 30 minutes.
Talk soon!